Search by Topic
Join our mailing list!
Thanks! You've been successfully signed up for the BTU newsletter!
LMA MAD Nasal Intranasal Mucosal Atomization Device
The LMA MAD Nasal™ Intranasal Mucosal Atomization Device will deliver a mist of atomized medication that is absorbed directly into your patient's blood stream avoiding first-pass metabolism.
Assure Prism Multi Blood Glucose Meter
Designed for use by healthcare professionals, this value-packed meter offers the features and quality you have come to expect from the leaders in diabetes management in long-term care.
Small Volume Nebulizers
The Curaplex Small Volume Nebulizers can nebulize in either an upright position or angled up to 45 degrees and has an ideal particle size production allowing high lung deposition.
April 21, 2016
Tips for assessing and treating occupants of a structure fire
One of the main concerns for responders treating patients involved in structure fires is generally the presence of thermal burns. While burns may be the most visually obvious forms of injury from exposure to a fire, smoke inhalation is actually the leading cause of death in fire victims .
Smoke inhalation can cause injury and death to patients both as a result of the products of combustion contained in the smoke and due to the fact that fire may create a hypoxic environment as oxygen is used up in an enclosed space. Composition of ambient air is an important link in the life support chain and multiple aspects of a structure fire can disrupt it.
The elements of smoke
When synthetic materials burn, they create a variety toxic gases including carbon monoxide, hydrogen cyanide and phosgene. It is important to recognize the possibility that a victim removed from a fire in an enclosed space may have been exposed to these gases and may be suffering from symptoms associated with that exposure.
Carbon monoxide is a byproduct of incomplete combustion and is slightly lighter than air which means that it will rise from the point of a fire and move upwards. In the case of the scenario, a fire in the basement and on the first floor will produce carbon monoxide which moves upward in the house. Since the patient’s bedroom is on the second floor, he was in a location where carbon monoxide would built up first resulting in exposure despite the absence of obvious thermal burns.
Carbon monoxide binds to the hemoglobin in the blood more readily than oxygen does and is less likely to be released than oxygen . This means that hemoglobin will be occupied by the carbon monoxide and will be unable to bind oxygen for transport around the body. Because of this behavior, carbon monoxide is also an asphyxiant: the patient enters a hypoxic state despite the availability of oxygen in the ambient air.
Some assessment techniques, like pulse oximetry, may not be useful in carbon monoxide poisoning patients as detailed below.
Monitoring and assessing victims of a structure fire
Patients with smoke inhalation and suffering from cyanide poisoning may experience altered level of consciousness, unresponsiveness and hypotension. Any of these signs in the presence of suspected smoke inhalation should be cause for concern.
Symptoms of carbon monoxide poisoning vary with the time and concentration of the exposure but result from the hypoxic state the patient is now experiencing. Symptoms include:
Since carbon monoxide binds to hemoglobin in the blood, it can render pulse oximetry useless because it measures the percentage of occupied hemoglobin molecules. Pulse oximetry will show a falsely high reading if those molecules are bound to carbon monoxide. As a result, SpO2 should not be considered reliable for toxic inhalation patients.
There are, however, monitors available on the market which measure the amount of carbon monoxide bound to hemoglobin in the blood. This measurement is referred to as carboxyhemoglobin saturation and is abbreviated SpCO.
Generally patients begin to exhibit symptoms at readings of 10-20 percent saturation with serious effects occurring over 50 percent saturation . SpCO monitoring is important not only for patients extricated from fires, but also for firefighters working at a structure fire. Because carbon monoxide is colorless and odorless, workplace exposure may go unnoticed until symptoms occur.
One final monitoring technology to consider for smoke inhalation patients is end-tidal capnography. There is no hard and fast rule about what reading to expect from ETCO2 but a decreased reading may be the result of impaired gas exchange due to lung injury from breathing toxic elements in the smoke.
The composition of ambient air
Since a fire burning in a structure is an example of incomplete combustion, it is also expected that carbon monoxide will be produced and begin to accumulate. Additionally, the presence of synthetic and plastic items in most residences leads to an expectation that patients removed from those environments will have been exposed to cyanide gas and other asphyxiants. Combined with a hypoxic environment, EMS providers treating these patients should have a high index of suspicion for disruptions in the life support chain.
You begin treatment by placing an NPA in his right nare which improves the depth of his respirations. You then place him on high-flow oxygen. His respiratory rate remains unchanged and you elect to switch to a BVM to assist ventilations.
Your partner, an ALS provider, starts an IV and begins an infusion of hydroxocobalamin — a drug which binds directly to cyanide in the blood allowing the body to excrete it. You prepare for transport to the local trauma center which also has a hyperbaric chamber.